Dynojet 200: Installation Guide - Manual (Page 26)

Motorcycle Dynamometer Installation Guide
C H A P T E R 2
Dynoware EX+ Hardware Stack
2-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DYNOWARE EX+ HARDWARE STACK
The standard dynamometer electronics package (hardware stack) is comprised of four
interconnected modules: Atmospheric Sensing Module, RPM Module, Dynamometer
Input/Output Module, and the CPU Module.
Figure 2-1: Dynoware EX+ Hardware Stack
A TMOSPHERIC S ENSING M ODULE
The atmospheric sensing module measures absolute pressure, air temperature, and
relative humidity. These measurements are used by WinPEP to correct power and
torque measurements to standard atmospheric conditions according to a DIN, SAE, or
other formula.
LED Indicator Description
The green LED glows when the atmospheric sensing
module is receiving power.
The flashing amber LED indicates the module processor
is operating properly.
system expansion
connector
atmospheric
sensing module
RPM module
dynamometer
input/output module
CPU module