Extended carriage, Parts list – Dynojet 200: Installation Guide User Manual
Page 54
Motorcycle Dynamometer Installation Guide
C H A P T E R 3
Extended Carriage
3-24
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EXTENDED CARRIAGE
The extended carriage option increases the maximum wheel base (measured from the
front of the front wheel to the center of the rear wheel) from 84 inches to 102 inches
for testing raked cruisers and drag bikes.
To prevent possible injury, disconnect the battery before performing any dyno
maintenance or installing any optional accessory.
P
ARTS
L
IST
The following table lists all of the parts included in the Extended Carriage Installation
kit. Check your kit against the parts listed to make sure you have received all of the
parts. If any part is missing, contact Dynojet Technical Support.
part number
description
quantity
36488100
Nut, 3/8"-16, Nylock
6
36560834
Screw, 1/4-20 x 1/2", Button-head
2
DM150-002-008
Nut, 5/16"
4
DM150-011-002
Washer, 3/8", Flat
12
DM150-015-001
Nut Block
1
DM150-016-007
Carriage Screw Support Bracket
1
DM150-019-012
Bolt, 3/8 x 1", Hex
6
EXT100-206
Extended Carriage Support Bracket
1
EXT100-206
DM150-019
Carriage and Tire Stop
1
DM150-014-002
Small Leveling Shim
1
DM150-015-002
Large Leveling Shim
1
DM150-002-003
Bolt, 5/16 x 1 1/2"
4
DM150-002-004
Washer, 5/16", Lock
4