Figure 3-12: adjust the brake pad space, Figure 3-13: install the air cylinder – Dynojet 200: Installation Guide User Manual
Page 38
Advertising
Motorcycle Dynamometer Installation Guide
C H A P T E R 3
Air Brake
3-8
4
Adjust the space between the brake pad and the rotor making sure the rotor is
able to spin free of contact.
Loosen the jam nut and use the adjuster nut to move the brake pads in or out.
Figure 3-12: Adjust the Brake Pad Space
I
NSTALLING
THE
A
IR
C
YLINDER
AND
M
ASTER
C
YLINDER
A
SSEMBLY
1
With the air cylinder on the inside of the dyno frame and the mounting plate on
the outside, secure the air cylinder with the 1/2-20 x 3/4-inch bolt.
Figure 3-13: Install the Air Cylinder
jam nut
adjuster nut
bolt
air cylinder
mounting plate
cut away view of
dyno side panel
Advertising