Dynojet 200: Installation Guide - Manual (Page 32)

Motorcycle Dynamometer Installation Guide
C H A P T E R 3
Optional Accessories Overview
3-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPTIONAL ACCESSORIES OVERVIEW
Depending on your current configuration, there are various optional accessories that
can be added to your Dynojet Dynamometer to meet your individual needs. All of
these options can be added from the factory at the time of original dyno purchase, or
purchased separately and added at any time thereafter. A brief description of these
accessories follows.
Installation instructions for some of these options can be found in this chapter.
Complete installation instruction manuals may also be found by browsing the
Manuals folder on your WinPEP installation CD.Visit the Dynojet web site for more
information about dynamometer accessories and ordering information.
Air or Mechanical Brake—The air brake is an electro-pneumatic braking system
while the mechanical brake is a foot actuated hydraulic brake. Both brakes can be
utilized to quickly slow the drum after a run is complete. This is especially useful for
two-stroke applications when engine compression cannot be used to slow the drum.
Both brakes can greatly speed up the testing process. Refer to “Air Brake” on page 3-4
or “Mechanical Brake” on page 3-29 for installation instructions.
Dual Fan—The dual fan supplies air to cool the bike’s engine. Refer to “Dual Fan” on
page 3-17 for installation instructions.
Eddy Current Brake— The eddy current brake is perfect for engine break-in,
durability testing, and fuel injection mapping. Refer to your WinPEP CD for
installation instructions.
Extended Carriage—The extended carriage option increases the maximum wheel
base (measured from the front of the front wheel to the center of the rear wheel) from
84 inches to 102 inches for testing raked cruisers and drag bikes. Refer to “Extended
Carriage” on page 3-24 for installation instructions.
Fat Boy Adapter—The Fat Boy adapter is necessary when strapping a Harley-
Davidson Fat Boy, or any other bike with a solid front wheel, to the carriage of the
dyno. Adapter includes a second ratchet, ratchet strap, double-hook strap, and
necessary fastening hardware. Refer to your WinPEP CD for installation instructions.
High Inertia Drum—The high inertia drum is suggested when testing bikes that
produce more than 250 horsepower at the rear wheel. The extra inertia built into this
special drum adjusts the run time to be equivalent to that of a standard drum with an
average-power motorcycle.
Mobile Base—The mobile base is essential for shops that require maximum flexibility
and mobility. The mobile base allows the dyno to be relocated in a matter of minutes.
Refer to your WinPEP CD for installation instructions.
Monitor Arm—This articulated arm and platform supports the monitor, keyboard,
and mouse in a convenient position for operation while seated on the motorcycle.
Refer to “Monitor Arm” on page 3-34 for installation instructions.