Rice Lake Ohaus Explorer Pro High Capacity Instuction Manual - Manual (Page 22)

EN-18 Explorer Pro
3.4.4 Percent Weighing
Percent weighing allows placing a reference load on the balance,
then viewing other loads as a percentage of the reference. The
load placed on the pan as a reference is displayed as 100%.
Subsequent loads are displayed as a percentage of the reference.
The maximum limit is the capacity of the balance. The minimum
limit is 100d. The display data includes reference weight in
unit of measurement, difference value in percent, difference value
in measuring unit and a bar graph indicating present used
capacity of the balance.
PERCENT WEIGHING 01/01/03 03:05:45 PM
REFERENCE SETUP NEW REF
0.00 g Ref: 0.00g
Diff: 0.00 %
Diff: 0.00g
*
0g 6100g
Add Reference Weight, Press Enter
USE
PERCENT WEIGHING
With the NEW REF soft key highlighted, press the Enter button.
Place the reference weight on the pan and press the Enter
button again. The sample shown indicates a 200g weight
was placed on the pan.
PERCENT WEIGHING 01/01/03 03:05:45 PM
REFERENCE SETUP NEW REF
200.00 g Ref: 200.00g
Diff: 0.00 %
Diff: 0.00g
*
0g 6100g
Add Reference Weight, Press Enter
100.00
%
The reference weight is removed and a second weight is placed
on the pan. The example illustrates a 50 g weight.
PERCENT WEIGHING 01/01/03 03:05:45 PM
REFERENCE SETUP NEW REF
50.00 g Ref: 200.00g
Diff: -75.00 %
Diff: -150.00g
*
0g 6100g
25.00
%
ADJUSTMENTS
The PERCENT WEIGHING display contains three soft keys at the
top of the screen REFERENCE, SETUP and NEW REF.
NEW REF
When NEW REF soft key is selected, follow the screen instructions
“Add Reference Weight, Press Enter”. This establishes a new
reference weight.
SETUP
Select SETUP soft key and press the Enter button. The PERCENT
WEIGHING SETUP display is shown.
PERCENT WEIGHING SETUP
Unit : g
Reference : 0.00
Display Settings : Custom
Reference Key : Unlocked
New Reference Key : Unlocked
Exit