Rice Lake Ohaus Explorer Pro High Capacity Instuction Manual - Manual (Page 46)

EN-42 Explorer Pro
GLP PRINT OPTIONS
Project Name : OHAUS
User Name : OHAUS
Date & Time : Off
Balance ID : Off
Project Name : Off
User Name : Off
Calibration : Off
Reference : Off
Application Mode : Off
Result Line 1 : Off
Result Line 2 : Off
Result Line 3 : Off
Project Name: (default is OHAUS)
A project name of up to 8 characters may be entered.
User Name: (default is OHAUS)
A user name of up to 8 characters may be entered.
Date & Time: On, Off (default is Off)
When set On, will output date and time.
Balance ID: On, Off (default is Off)
When set On, will output Balance ID.
Project Name: On, Off (default is Off)
When set On, will output project name.
User Name: On, Off (default is Off)
When set On, will output User name.
Calibration: On, Off (default is Off)
When set On, prints out the calibration data after the completion
of every calibration process. See sample of span calibration.
---------------SPAN CAL--------------
Cal: 400.000 g
Old:399.445 g
Diff:-0.555 g
Wt. ref______________________
Name_______________________
-----------------END--------------------
Reference: On, Off (default is Off)
When the Reference function is set ON, it will output the value
of weight used as a reference in either Percent Weighing mode
or Parts Counting mode.
Application Mode: On, Off (Default is Off)
When set to On, the Application name will be printed during a
print operation.
SAMPLE PRINTOUT
Result Lines: On, Off (Default is Off)
Each of the six Result Lines can be set independently. When set
to On, the Result Line information will be printed
Exit:
When selected, returns to previous menu.
3.5.9 Library
Seven application modes in the balance have provisions for
storing a library name, they are: Parts Counting, Check
Weighing, Differential Weighing, Formulation, Statistics,
Statistical Quality Control (SQC), Density. When a library
name is selected, the associated function is also displayed.
A Library menu is provided which allows the selected library
name and function to be run, deleted or delete all entries. If
you have accessed the library and do not want to run or
delete a name, an exit to weighing selection can be made
by pressing the Menu button which does not affect the library
Select LIBRARY function and press the Enter button. Display
advances to LIBRARY menu with RUN, DELETE and DELETE
ALL options shown.
Select either RUN, DELETE, or DELETE ALL. When RUN is selected,
a screen showing all stored libraries is displayed. Any stored
library can be recalled, enabled and run. All parameters from
a previously run library are retained.
When a particular name is selected and the DELETE selection
is made, that particular name and function with all parameters
is removed from the library.
DELETE ALL, when selected, removes the entire contents of the
library.
LIBRARY
Run
Delete
Delete All
?: No
Exit