Rice Lake Ohaus Explorer Pro High Capacity Instuction Manual - Manual (Page 29)

Explorer Pro EN-25
View Results:
Allows the calculated results of the Formulation process to be
viewed.
Exit:
In the sub menu, will return to the previous menu.
In the main men, will return to the last application mode.
Mode: Weight, Percent (default is Weight)
Allows the selection of the various calculations in the final
results.
Unit: g, kg, etc... (default is g)
Allows the selection of all activated units.
Number of Items: xx (default is 2)
Allows manual entry for number of items. Only integer values
up to 10 are valid.
Target Weight: xxx.xx (default is 5.00)
Allows manual entry for the Target Weight value. Target
Weight has to be less than the balance capacity.
Display settings: Custom/ Default (default is Default)
Allows Display Settings to be set to default or custom. If Display
Settings is set to custom, information on the result lines of the
Formulation mode can be individually turned on or off. If Display
Setting is set to default, all the information is turned on.
Item Setup:
Displays a setup menu that will allow a name and a value to
be assigned to each item.
With Items Setup selected, specify the names for each component
of the formula (limit 9 characters) and either the weights or
percentages.
3.4.10 Statistics
Statistics are used when it is desired to compare a number of
samples and examine the relative deviation of the samples
along with other statistical data. A minimum of three samples
is required in this program. Statistics contains menu options
which include: number of samples, maximum, minimum,
difference, sum, mean, standard deviation, relative deviation,
auto sample, and auto print. Most of these can be set on or off
except sample size which can be set for a particular number.
When a printer or computer is connected to the balance, all
statistical information can be observed and printed. WEIGHING,
ANIMAL WEIGHING, CHECK WEIGHING and FILLING are the
functions for providing Statistical Data.
STATISTICS 01/01/03 03:05:45 PM
RESULTS SETUP START
0g 6100g
*
Max: 0.00 g Sum: 0.00 g
Min: 0.00 g Mean: 0.00 g
0.00
g
USE
(Used for Weighing and Animal Weighing)
STATISTICS 01/01/03 03:05:45 PM
RESULTS SETUP START
*
Max: 0.00 g Sum: 0.00 g
Min: 0.00 g Mean: 0.00 g
Target: 10.00 g
0.00
g
0%
50% 90%
110%
100%
(Used for Filling)
ITEMS SETUP
Item Name 1 : Item 1
Item Name 2 : Item 2
Item Weight 1 : 0.00
Item Weight 2 : 0.00
Exit