Rice Lake Ohaus Explorer Pro High Capacity Instuction Manual - Manual (Page 25)

Explorer Pro EN-21
FILLING SETUP
Unit : g
2 nd unit : g
Target Weight : 0000
Display Settings : Custom
Target Key : Unlocked
New Target Key : Unlocked
Exit
Units: g, kg, etc...(default is g)
Allows the selection of all activated units.
2nd UNITS: g, kg, etc...(default is g)
Allows the selection of all activated units.
Target Weight: 0-99999999 (default is 0)
Allows entering a specific target filling weight.
Display Settings: Custom, Default (default is Default)
Allows Display Settings to be set to default or custom. If Display
Settings is set to custom, information on the result lines of the
Filling mode can be individually turned on or off. If Display
Setting is set to default, all the information is turned on.
Target Key: Locked, Unlocked (default is Unlocked)
This feature allows to lock or unlock the soft key function.
New Target Key: Locked, Unlocked (default is Unlocked)
This feature allows to lock or unlock the soft key function.
Exit:
When selected, balance returns to the Filling Mode.
TARGET
With the TARGET soft key highlighted, press the Enter button.
The FILLING display is shown with the value of the Target
highlighted. Using the arrow buttons and the Enter button, the
Target value can be changed.
FILLING 01/01/03 03:05:45 PM
TARGET SETUP NEW TARGET
0.00 g
0.00
g
*
0%
50% 90%
110%
100%
Target: 0.00 g
Diff: -0.00 g
3.4.7 Gross / Net / Tare Weighing
Gross/Net/Tare (G/N/T) application allows to display Gross
(sample plus container weight), NET (sample weight) and TARE
(container weight) simultaneously.
G/N/T WEIGHING 01/01/03 03:05:45 PM
UNITS 2nd UNITS TARE
0.00 g Gross: 0.00 g
Net: 0.00 g
Tare: 0.00 g
0g 6100g
* 0.00
g
USE
G/N/T WEIGHING
Press the O/T button to zero the balance. In this application,
the O/T button functions as a Zero and not as a Tare.
Place a container on the pan. With the TARE soft key
highlighted, press the Enter button. The container’s weight is
stored in memory in the balance. Place the material in the
container. The balance immediately displays the Gross, Net
and Tare weights. The net weight is displayed as large numerals.
Example shown represents a container weight of 50g and
material of 200g. The gross weight is displayed as 250g.
Before a new container is used, zero the balance by using the
O/T button.
G/N/T WEIGHING 01/01/03 03:05:45 PM
UNITS 2nd UNITS TARE
200.00 g Gross: 250.00 g
Net: 200.00 g
Tare: 50.00 g
0g 6100g
* 200.00
g
ADJUSTMENTS
The G/N/T WEIGHING display contains three soft keys at the top
of the screen UNITS, 2nd UNITS and TARE.
TARE
When the TARE soft key is selected, pressing the Enter button
will store the current display reading as the tare value.
2nd UNITS
When 2nd UNITS soft key is highlighted, each press of the
Enter button changes the measuring units that are On and will
appear under the large numerals. The last option when cycling
through the units is Off.
UNITS
When the UNITS soft key is highlighted, each press of the Enter
button cycles through all active measuring units on the Gross,
Net and Tare displays.