Rice Lake Ohaus Explorer Pro High Capacity Instuction Manual - Manual (Page 40)

EN-36 Explorer Pro
Porous Material: Off, On (default is Off)
Allows Porous Material to be turned On or Off . When Porous
Material is turned on, a screen is displayed to allow the manual
entry of Dry Weight and Density Of Oil.
Sinker Volume: 000.00
Allows the volume of the sinker to be manually entered.
Auto Sample: Off, On (default is Off)
Allows Auto Sample to be turned On or off . When Auto Sample
is turned on, the Density process is automatic.
Auto Print: Off, On (default is Off)
Allows Auto Print to be turned On or off . When Auto Print is
turned on, the final calculated results are automatically printed
out at the end of the Density process.
Display settings: Custom/ Default (default is Default)
Allows Display Settings to be set to default or custom. If Display
Settings is set to custom, information on the result lines of the
Density mode can be individually turned on or off. If Display
Setting is set to default, all the information is turned on.
Exit:
In the sub menu, will return to the previous menu.
In the main menu, will return to the last application mode.