Rice Lake Ohaus Explorer Pro High Capacity Instuction Manual - Manual (Page 30)

EN-26 Explorer Pro
STATISTICS 01/01/03 03:05:45 PM
RESULTS SETUP START
*
Max: 0.00 g Sum: 0.00 g
Min: 0.00 g Mean: 0.00 g
Under: 5.00 g Over: 15.00 g
0.00
g
Under Accept Over Under Accept Over
(Used for Check Weighing)
Before using the Statistics feature, the Statistics Setup should
be reviewed. Highlight the SETUP soft key and press the Enter
button. Assign a Library Name.
NOTE: All Statistics settings made with a Library Name will be
directly associated with the Library name. When a Library Name
is called up, the Mode and all settings will be retained with the
Library Name.
Review the settings and change as necessary.
Place a container on the pan and press the >O/T< button to
tare the container weight.
With the START key highlighted, press the Enter button. Follow
the instructions on the screen. The START key changes to
ACCEPT. Add the sample to the container. Repeat for all
samples.
Weighing/Animal Modes
When Weighing Mode or Animal Weighing Mode is selected,
The bar graph at the bottom of the screen indicates the weight
of each sample when added. The Maximum, Minimum, Sum
and Mean weights are also displayed on the screen.
Filling Mode
When the Fill Mode is selected, the Target Weight that was
entered on the STATISTICS SETUP screen will display the sample
weight on the bar graph as a percentage. The Maximum,
Minimum, Sum , Mean and Target weights are also displayed
on the screen.
Check Weighing Mode
When Check Weighing Mode is selected, the display at the
bottom of the screen changes to Under/Accept/Over. As each
sample is placed on the pan, the large numerals on the display
will indicate the weight of the sample and the bar graph at the
bottom of the screen indicates either Under, Accept or Over
based on the Over and Under values added in the STATISTICS
SETUP menu. The Maximum, Minimum, Sum, Mean Under
and Over weights are also displayed on the screen.
STATISTICS SETUP
Library Name : STATISTICS
Mode : Weighing
Unit : g
Number Of Samples : 3
Maximum : On
Minimum : On
Difference : On
Sum : On
Mean : On
Std. Deviation : On
Rel. Deviation : On
Auto Sample : On
To review remaining items on the screen, scroll down.
STATISTICS SETUP
Maximum : On
Minimum : On
Difference : On
Sum : On
mean ; On
Std. Deviation : On
Rel. Deviation : On
Auto Sample : On
Auto Print : On
Display Settings : Default
View Results
Exit