Torbal AD50 Series Manual - Manual (Page 13)

Instruction Manual - TORBAL AD Series
CHAPTER 7.
MAIN MENU
Main Menu is used to configure the scale and its weighing modes. Before entering the menu, complete
and clear any active function by pressing the “C” key. To enter the Main Menu press the “M” key. Once the
“M” key is pressed the scale will display available Menu options. Commands: CALIB, UNIT, MODE, AUTO,
GLP,PRINT, SET TD and RESET will flash sequentially. To select and enter a desired menu option press the
“T” (YES) key while that menu option is displayed.
Note: Scrolling through the options may be accelerated by manually pressing the 0 (NO) key.
7.1.1.Calibration
When the scale is initially installed it must be calibrated to ensure accuracy of weighing results.
Calibration should be performed periodically or whenever the scale is moved. Before calibrating the
scale, have the appropriate calibration weight available.
13