Torbal AD50 Series Manual - Manual (Page 55)

Instruction Manual - TORBAL AD Series
Note: To change the limit setting press “C” and repeat Steps 1 to 7. If the same limits are used,
the scale can be tared without clearing the function and the new object can be weight-checked.
To exit check weighing and switch to a different function, press “C” to clear the current function
and then press “F” to select a different function (follow Steps 1 through 3 from Chapter 8 on
page 44).
(D) Display Hold
The Display Hold function is used to retain a weighing result static on the LCD display after it
has stabilized. To use the Display Hold function follow the steps below.
1. Place an empty container on the pan and press “T” to tare.
2. After taring the container, place the weight on n the pan.
55