Torbal AD50 Series Manual - Manual (Page 44)

Instruction Manual - TORBAL AD Series
CHAPTER 8.
FUNCTION MENU: USING THE MODES AND FUNCTIONS
All enabled and configured modes as well as applications are ready to use from the Function Menu. To
select a function that was enabled and configured follow the steps below:
1. Press the “F” (Function) key.
2. The enabled functions will scroll.
Note: Scrolling through the options may be accelerated by manually pressing the 0 (NO) key.
3. When the desired function is displayed, press the “T” (YES) key. A letter corresponding to the selected
function will appear on the lower portion of the LCD display, indicating that that the function has been
activated.
Note: To return to basic weighing, clear the current function by pressing the “C” key. Enter the Function
Menu by pressing the “F” key. When WEIGH is displayed, press the “T” (YES) key.
44