Torbal AD50 Series Manual - Manual (Page 63)

Instruction Manual - TORBAL AD Series
6. Once “C” has been pressed, the command YES-NO will be displayed, asking to confirm clearing
of the function. To abort the clearing the function press the 0 (NO) key. To clear the function
press the “T” (YES) key (all data will be lost).
To clear To continue
To exit totalizing and switch to a different function, press “C” to clear the current function and
then press the “F” key to select a different function (follow Steps 1 through 3 from Chapter 8 on page
44).
63