Torbal AD50 Series Manual - Manual (Page 28)

Instruction Manual - TORBAL AD Series
(F) Totalizing
1. To enable totalizing press the “T” (YES) key when Total is displayed.
2. Commands tot On and tot OFF will be displayed sequentially. To enable totalizing and proceed
with configuration press the “T” (YES) key when tot On is displayed. If the function is already
enabled and you wish to disable it, press the “T” (Yes) key when tot OFF is displayed.
3. The totalizing function can operate in two different operating modes: automatic, and manual
(see Table 7.1.3.F). The operating modes will scroll once the function is enabled. To select a
desired operating mode for the totalizing function, press the “T” (YES) key while the mode is
displayed. I.e. to enable automatic totalizing, press “T” (YES) when AUTO is displayed.
28