Torbal AD50 Series Manual - Manual (Page 24)

Instruction Manual - TORBAL AD Series
(C) Check Weighing
1. To enable check weighing press the “T” (YES) key when Check is displayed.
2. Commands CHK On and CHK OFF will be displayed sequentially. To enable check weighing
press the “T” (YES) key when CHK On is displayed. If the function is already enabled and you
wish to disable it, press the “T” (Yes) key when CHK OFF is displayed.
3. After enabling check weighing, DONE will be displayed indicating that the function has been
configured and that the scale is ready for use. To use the function, follow the directions in
Chapter 8. To exit the mode menu use the “C” key.
24