Torbal AD50 Series Manual - Manual (Page 20)

Instruction Manual - TORBAL AD Series
(A) Animal Weighing
1. To enable animal weighing, press the “T” (YES) key when ANIMAL is displayed.
2. Commands An On and An OFF will be displayed sequentially. To enable animal weighing and
proceed with configuration press the “T” (YES) key when An On is displayed. If the function is
already enabled and you wish to disable it, press the “T” (Yes) key when An OFF is displayed.
3. Animal weighing can operate in three different modes: automatic, semi-automatic and manual (see
Table 7.1.3.A). The operating modes will begin to scroll once the function is enabled. To select a
desired operating mode for animal weighing, press the “T” (YES) key while the mode is displayed.
To enable automatic animal weighing, press “T” (YES) while AUTO is displayed.
20