Yamaha RM800 - Manual (Page 12)

Meters
Meters
- o - P E A K - o -
-O-
- o -
- o -
- o -
■ O "
- o -
- o -
- o -
- o -
> +6 ■
. +4 ■
.
+2
.
■ o ■
.
-2
.
■ -4 .
■ -7 .
■ - 10 .
■ -15.
-O-
-O-
- o -
- o -
- o -
- o -
- o -
■ o -
- 0 -
-0-
- o -
- o -
- o -
- o -
- o -
- o -
- O "
- o -
- o -
- o -
- o -
- o -
■ o -
■ O '
- o -
■ o *
- o -
- o -
■ O ' I PEAK—o —
- +6 —o-
- +4—0-
- +2 —o-
- o —O-
- -2—0-
- o -
- -7 —o-
- -10—0-
- -15 — 0 —
- 0 -
-0-
- o -
- o -
- o -
- o -
-0-
- o -
- o -
• o -
- O - P E A K - O -
■ o — + 6 — o -
■ o —
+4 — o -
- o — +2 — O -
■O— o —O-
■ o — -2 — o -
■ o — - 4 — o -
■ o — - 7 — 0 ■
.0—-10—O-
-O —-15—o-
o - P E A K - o -
o — +
0 - 0 -
+4-0-
+2-0-
o —o-
-2 —O-
o-
-7-0-
-10—o-
-15 — 0-
□- METER SELECT- -□
RM800 features ten 11-segment LED meters, providing output level metering
for all outputs. The STEREO meters are dedicated to the stereo output,
whereas the GROUP meters are dual operation meters. The METER SELECT
switches are used to select which signals are displayed. The following table
shows how they work.
Meters Switch Up Switch Down
1 CROUP 1 AUX SEND 1
2 GROUP 2 AUX SEND 2
3 GROUP 3 AUX SEND 3
4 CROUP 4 AUX SEND 4
5 CROUP 5 MONI L/AUX SEND 5
6 GROUP 6 MONI R/AUX SEND 6
7 GROUP 7 —
8 CROUP 8 PFL/AFL
On all meters, the 0 LED means an output level of +4dB for +4dB outputs, and
-lOdBV for -lOdBV outputs (that’s the rated level).
The PEAK LEDs light up when signals reach 3dB below clipping. However, if
the STEREO L/R outputs are connected to a device with balanced inputs, they
light up when the signal reaches 7dB below clipping.
For PFL/AFL metering, the PEAK LEDs light up when the CONTROL ROOM
and PHONES post-control signal reaches 6dB below clipping.
RM800 User's Cuide