General specifications, Specifications – Yamaha RM800 User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

34

Specifications

General Specifications

Frequency Response

20 Hz-20 kHz +1, -2 dB (ST OUT L/R, CROUP, AUX, MONI/AUX SEND @ 600 ii) •

THD

Less than 0.1% (20 Hz-20 kHz @ +14 dB*) (ST OUT L/R, GROUP, AUX, MONI/AUX SEND

@ 600 O)

Crosstalk (@1 kHz)

70 dB adjacent input channels

70 dB adjacent output channels

Hum 6t Noise (Average, Rs=1S0 i2)
(Measured with BPF 20 Hz-20 kHz)

-128 dB* Equivalent Input Noise (MIC/LINE IN)

-96 dB* residual output noise (STEREO OUT, CROUP OUT +4, AUX, MONI/AUX SEND)

-82 dB* (STEREO OUT, CROUP OUT +4)

Master fader at nominal level and all module assign switches OFF

-64 dB* (68 dB S/N) (STEREO, CROUP OUT +4)

Master fader and one input module fader at nominal

-80 dB* (AUX, MONI/AUX SEND)
AUX SEND master level control and all module AUX controls at minimum

-64 dB* (68 dB S/N) (AUX, MONI/AUX SEND)
AUX SEND master level control and one input module AUX control at nominal

Maximum Voltage Cain

74 dB MIC/LINE IN to STEREO OUT

22 dB TAPE IN to STEREO

84 dB MIC/LINE IN to CROUP OUT (+4)

86 dB MIC/LINE IN to AUX SEND 1-4

76 dB MIC/LINE IN to MONI/AUX 5-6

62 dB MIC/LINE IN (9-16/17-24) to TAPE SEND

6 dB AUX RETURN 1-4 to STEREO OUT

0 dB ST SUB IN to STEREO OUT

18 dB 2TR IN to CONTROL ROOM OUT

Input Module
EQ

High

12 kHz, ±15 dB, shelving (turnover/rolloff point 3 dB below maximum variable level)

Mid

250 Hz-5 kHz, +15 dB, peaking

Low

80 Hz, ±15 dB, shelving (turnover/rolloff point 3 dB below maximum variable level)

Input Module GAIN control

44 dB variable

Input Module PAD

0/20 dB attenuation

Meters (0 LED = +4 dB* output level)

10x11 -segment LED bars (-20, -15, -10, -7, -4, -2, 0, +2, +4, +6, PEAK)

Input Module
Indicators

PEAK

RED LED lights up when the post-EQ signal is 3 dB below clip point

SiCNAL

GREEN LED lights up when the post-EQ signal is -10 dB*

Power require­
ments

US & Canada model

120V AC, 60Hz

General model

230VAC, 50Hz

British model

240V AC, 50Hz

Power Consumption

RM800-16 90 W
RM800-24 90 W

Weight

RM800-16 24 kg
RM800-24 31 kg

Dimensions (W x H x D)

RM800-16 807x 157x691 mm
RM800-24 1047x157x691mm

*0dB = 0.775V R.M.S.

RM80C User's Cuide

Advertising