Precautions, Location, Ventilation – Yamaha RM800 User Manual
Page 2: Avoid physical shocks, Always power off before making connections, Handle cables carefully, Clean with a soft dry cloth, Always use the correct power supply
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Precautions
1. Location
Keep the unit away from locations where it is likely to be exposed to high temperatures or
humidity — such as near radiators, stoves, etc. Also avoid locations that are subject to exces
sive dust accumulation or vibration, which could cause mechanical damage, and locations
subject to strong electromagnetic fields, such as close to broadcast equipment.
2. Ventilation
The unit has ventilation slots on the side and bottom panels. Do not block these slots.
3. Avoid Physical Shocks
Strong physical shocks to the unit can cause damage. Handle it with care.
4. Do Not Open the Case or Attempt Repairs or Modifications Yourself
This product contains no user-serviceable parts. Refer all maintenance to qualified Yamaha
service personnel. Opening the case and tampering with the internal circuitry voids the war
ranty.
5. Always power off before making connections
Always turn the power OFF before connecting or disconnecting cables. This is important to
prevent damage to the unit itself as well as other connected equipment.
6. Handle Cables Carefully
Always plug and unplug cables — including the AC power cord — by gripping the connec
tor, not the cord.
7. Clean With a Soft Dry Cloth
Never use solvents such as benzine or thinner to clean the unit. Wipe clean with a soft, dry
cloth.
8. Always Use the Correct Power Supply
Make sure that the power supply voltage specified on the rear panel matches your local AC
rhains supply. Also make sure that the AC mains supply can deliver more than enough cur
rent to handle all equipment used in your system.
*
IMPORTANT NOTICE FOR
THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT: The wires in this mains lead, are coloured in accordance
with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not
correspond with the coloured markings identifying the terminals in your
plug proceed as follows:
The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal
which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the
three pin plug.
* This applies only to products distributed by YAMAHA - KEMBLE
MUSIC (U.K.) LTD.
5-2 BS2 01 2/5