Changing the network mode, Managed mode, Button after pressing the m – Aviom 6416m/RCI/MCS User Manual
Page 37
26
c
ontrol
M
Aster
6416
m
A-NET SLOT
Edit Lock
Managed
Edit
CONTROL
MASTER
ENTER
CANCEL
Gain
(dB)
Port A
Port B
Auto
A-NET
TRANSMIT
Manual
VDC SLOT
RS-232
MIDI In
MIDI Out
GPIO In
GPIO Out
ASSIGN
PORT
CLOCK
MASTER
CONTROL
Sample Rate
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Link
Link
Link
Link
Link
Link
Link
Link
Mute
Edit
Mute
Edit
Mute
+48V
Phase
Low Cut
SAVE
RECALL
Pad
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Mute
Mute
Mute
Edit
Edit
Edit
Edit
Mute
Edit
Mute
Edit
Mute
FUNCTION
Group 4
Group 3
Group 2
The selection button in the A-Net Transmit section of the interface is used to
choose Manual Mode options.
Changing the Network Mode
The button beneath the Auto/Manual Mode LEDs is used to select the
network mode and to set the transmit port in Manual Mode. Pressing the
selection button will cycle through the available settings and will flash both
the mode LED and the Enter/Cancel LED. To confirm and change the network
mode, press the
E
ntEr
button. The Control Master will update the display on
all modules in the network to reflect the change. Press the
C
anCEl
button to
exit the mode change and return to the current state.
Managed Mode
Managed Mode requires the use of a computer with the Pro64 network for
tasks such as firmware updates, system monitoring, control, and editing.
The Control Master is the only module that can allow the network to enter
Managed Mode.
Entering Managed Mode requires the user to press the
E
ntEr
button after
pressing the
M
anagEd
button on the Control Master. Once the network
enters Managed Mode, all modules will light their Managed LEDs.