Aviom 6416m/RCI/MCS - Manual (Page 90)

79 Mcs F
eAtures
No
Control
The numeric keypad with inc/dec buttons
A-Net Slot Display
The two‑digit A‑Net Slot display shows the currently selected active network
Slot. Remember that any Slot can be selected for level monitoring, but only
mic preamp channels in the same Control Group can be edited from the MCS.
When selecting a new Slot, this display will show Slot numbers as they are
entered from the keypad; only the last two digits entered are used according
to the numeric keypad rules described above. Press E
ntEr
to recall a Slot or
press C
anCEl
to return to the previously selected Slot.
The Slot display is also used to show Preset numbers when saving or
recalling a mic pre Preset. Only numbers from 1 to 16 are used for preset
management.
No
Control
The A-Net Slot display is next to the numeric keypad
Select a Slot
To select a Slot to be monitored or edited, enter a number corresponding to
the Slot you wish to select and do one of the following:
Press • E
ntEr
to immediately display the selected channel/
Slot number, or
Do nothing; after a short pause, the channel/Slot will be
•
selected automatically.