Control group – Aviom 6416m/RCI/MCS User Manual
Page 56
45
6416
M
F
ront
P
Anel
Control Group
The Control Group functions are unique to the 6416m Mic Input Module and
the RCI Remote Control Interface.
Control Groups are useful when you want to have multiple 6416m modules
in a network separated into specific zones or when more than one operator
will be editing channel strip parameters remotely.
6416
m
A-NET SLOT
Edit Lock
Managed
Edit
CONTROL
MASTER
ENTER
CANCEL
Gain
(dB)
Port A
Port B
Auto
A-NET
TRANSMIT
Manual
VDC SLOT
RS-232
MIDI In
MIDI Out
GPIO In
GPIO Out
ASSIGN
PORT
CLOCK
MASTER
CONTROL
Sample Rate
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Link
Link
Link
Link
Link
Link
Link
Link
Mute
Edit
Mute
Edit
Mute
+48V
Phase
Low Cut
SAVE
RECALL
Pad
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Mute
Mute
Mute
Edit
Edit
Edit
Edit
Mute
Edit
Mute
Edit
Mute
FUNCTION
Group 4
Group 3
Group 2
Press the select button to choose a Group.
The RCI Remote Control Interface and MCS Mic Control Surface are required
to make use of the Control Group functionality. The setting of the Control
Group section of the 6416m interface has no effect when the RCI/MCS
combination is not part of the Pro64 network.
Pressing the Control Group selection button will cycle through the five
settings: Groups 1‑4 and off (no LED lit). The 6416m and RCI must be set to the
same Control Group to allow remote control commands to be recognized.
Setting the Control Group to the off position makes a 6416m module
unavailable for editing remotely from the RCI/MCS. Front panel edits are not
disabled.
The Control Group setting is not saved as part of a mic preamp Preset.