Channel activation rules, Level meter leds, Stereo link button – Aviom 6416m/RCI/MCS User Manual
Page 58: Level meter leds stereo link button, It is not necessary to press the e
47
6416
M
F
ront
P
Anel
Channel Activation Rules
It is not necessary to press the
E
ntEr
button to activate or deactivate a
channel.
Each Pro64 module remembers a unique set of active channels for Auto and
Manual Modes. For example, an input module could have channels 1‑8 active
for an Auto Mode application and channels 5‑6 and 12‑16 active for a Manual
Mode application. Changing network modes will restore the active channel
status for each connected module.
P
N
ote
: The active state for the channels on a 6416m is not saved as part of
a mic pre Preset.
Changing the A‑Net Slot range will clear the currently active channels on
an input module automatically to protect against channel/Slot conflicts or
unintentional overwriting in Manual Mode.
Level Meter LEDs
Each input channel on the 6416m Mic Input Module has its own set of six
level LEDs—green, yellow, and red. Green LEDs are used for all levels up to
‑6dB. The yellow LED lights when the signal level reaches ‑6dB. Clipping is
indicated with the red LED, which lights when the level reaches 0dB. High
resolution metering with finer resolution and more LEDs is available when
using the MCS.
6416
m
A-NET SLOT
Edit Lock
Managed
Edit
CONTROL
MASTER
ENTER
CANCEL
Gain
(dB)
Port A
Port B
Auto
A-NET
TRANSMIT
Manual
VDC SLOT
RS-232
MIDI In
MIDI Out
GPIO In
GPIO Out
ASSIGN
PORT
CLOCK
MASTER
CONTROL
Sample Rate
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Link
Link
Link
Link
Link
Link
Link
Link
Mute
Edit
Mute
Edit
Mute
+48V
Phase
Low Cut
SAVE
RECALL
Pad
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Mute
Mute
Mute
Edit
Edit
Edit
Edit
Mute
Edit
Mute
Edit
Mute
FUNCTION
Group 4
Group 3
Group 2
Each input channel has its own LED level meter.
The level meter LEDs will always show the level of the incoming analog audio
signal, even when the channel is not active on the network.
Always try to optimize input levels to assure proper gain staging throughout
the network and any connected audio devices.
Stereo Link Button
Adjacent pairs of channels on the 6416m can be linked together as a stereo
pair. The channels must be an odd‑even pair, such as 1‑2, 13‑14, etc. There is
one Link button for each channel pair, eight in all.