Aviom 6416m/RCI/MCS - Manual (Page 51)

40 6416
M
F
ront
P
Anel
6416m Front Panel Features
This section describes the features and functions of all front‑panel
components of the 6416m Mic Input Module. Many of the network‑wide
settings are common to other Pro64 modules and will be familiar to users of
other Pro64 devices.
A-Net Slot Configuration
Each I/O module in a Pro64 network can be set to operate within a specific
part of the network, referred to as its Slot range. The actual number of Slots
available in a network is determined by the current sample rate; at 48kHz,
there are 64 Slots available, for example.
6416
m
A-NET SLOT
Edit Lock
Managed
Edit
CONTROL
MASTER
ENTER
CANCEL
Gain (dB)
Port A
Port B
Auto
A-NET
TRANSMIT
Manual
VDC SLOT
RS-232
MIDI In
MIDI Out
GPIO In
GPIO Out
ASSIGN
PORT
CLOCK
MASTER
CONTROL
Sample Rate
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Link Link Link Link Link Link Link Link
Mute
Edit
Mute
Edit
Mute
+48V Phase Low Cut SAVE RECALL Pad
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Ø
Pad
+48V
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute
Edit
Mute Mute Mute Mute
Edit Edit Edit Edit
Mute
Edit
Mute
Edit
Mute
FUNCTION
Group 4
Group 3
Group 2
The inc/dec buttons below the Slot readout are used to scroll through the
available Slot settings.
A-Net Transmit
Each input module in a Pro64 network has the capability of transmitting
its input channels into the network. When using Auto Mode, the network
manages the access of these channels to the available Slots. Auto Mode is
indicated with a red LED in this section. No user options are available in this
part of the interface.
In Manual Mode, the user decides how input channels will be distributed to the
network. Inputs can be sent to the A port, B port, or to both ports at the same time.
Assigning the 6416m to send active inputs to the A‑Net ports is done with the
A‑Net Transmit selection button. Press the button to cycle through the various
choices.