Aviom 6416m/RCI/MCS - Manual (Page 85)

74 rci F
ront
P
Anel
F
eAtures
Balanced Line-Level Monitor Output
The RCI outputs the currently selected Slot as a +4dBu line‑level audio signal
that can be connected to a mixing console or any other device capable of
taking in a line‑level audio signal.
PAD
0.75 AMP
BACKUP POWER
PIN 1 = GND
PIN 4 = 24VDC
AC POWER
FUSE: 250VAC-F4AL
Remote Control Interface
RCI
B A
+4dBu LINE�LEVEL OUTPUT �BAL�
PIN 2 HOT
The RCI outputs the currently selected Slot as a +4dBu mono line-level
audio signal.
The output of this jack is a fixed level and is not affected by the front‑panel
headphone monitor output level control.
Output Pad Switch
The Pad switch lowers the output level of the +4dBu line‑level signal present
at the monitor output jack by 21dB. Move it to the right to enable the 21dB
pad.
The output pad switch has no effect on the front‑panel headphone monitor’s
output level.
A-Net Ports
Two EtherCon jacks are provided for A‑Net connections, labeled A and B.
Connections can use standard RJ45‑style cables or cables outfitted with
the locking EtherCon connector. Refer to the section on network modes for
additional information about using these jacks.