Aviom 6416m/RCI/MCS - Manual (Page 95)

84 Mcs F
eAtures
+48V Phantom Power Button
Phantom power for devices such as condenser mics is available for each
6416m mic preamp channel. The use of Enter/Cancel is required to confirm a
change when using +48V phantom power.
To turn phantom power on, press the +48v button once. The Enter and
Cancel LEDs will blink. Press E
ntEr
; the phantom power is on. Press the C
anCEl
button to exit without turning phantom power on.
To turn a channel’s phantom power off when it is enabled, press the +48v
button. The Enter and Cancel LEDs will blink. Press E
ntEr
; the phantom
power is turned off. Press C
anCEl
to exit without turning the +48V phantom
power off.
The on/off state of the +48V phantom power is saved for every channel in
each mic pre Preset.
No
Control
Using the phantom power and pad functions requires the use of the Enter/
Cancel buttons.
P N
ote
: Consult the documentation that came with your phantom powered
mic or other device to avoid damaging the product. Improper
application of +48V phantom power can damage the circuitry of
some older ribbon microphones, for example.
High Resolution Meter
Channel level is displayed in the high resolution meter for the selected Slot
even when the selected Slot does not originate on a Pro64 mic preamp
module.