Compex ONE - Manual (Page 23)

20
EN
One - U
ser M
anual
Adjusting stimulation energies
When you start a programme, you will be prompted to increase the stimulation
energies. This is critical to the success of any session. To find out what energy level
needs to be attained for each programme, refer to chapter 7 of this manual.
1 Programme duration in minutes and seconds
2 Session progression scale. For details on how this works, see the following section:
"Programme progression"
A Press the On/Off button to place the unit in Pause mode.
B C D E The device bleeps and the symbols of the four channels flash, changing
from + to 000: the four channels are at 000 energy. You must increase the stimulation
energy so that the stimulation can start. To do this, press the + buttons for the relevant
channels until the desired setting is reached.
A B C D E
1
2