Hardy HI 200DNWM DeviceNet Weigh Module - Manual (Page 17)

CHAPTER 3 - INSTALLATION
3-1
CHAPTER 3 - INSTALLATION
SCOPE Chapter 3 covers unpacking, cabling, inter-
connecting and installing the HI 200DNWM
weigh module. Users and service personnel
should be familiar with the procedures in this
chapter before installing or operating the
weigh module.
Unpacking 1. Before signing the packing slip, inspect
the packing for damage of any kind.
2. Report any damage to the carrier com-
pany immediately.
3. Check to see that everything in the pack-
age matches the bill of lading. You
should normally have.
4. HI 200DNWM Module
1 HI 200DNWM module with mating
connectors
1 Installation and Operation Manual
NOTE: Electronic Data Sheet Software is available
on our Website www.hardyinst.com
5. HI 200DNWM-DR Module with DIN
Rail Kit
1 HI 200DNWM module with mating
connectors and a DIN Rail adapter.
1 Installation and Operation Manual
NOTE: Electronic Data Sheet Software is available
on our Website www.hardyinst.com
6. HI 200DNWM-SK1 Modules (2 com-
plete modules pre-stacked)