Hardy HI 200DNWM DeviceNet Weigh Module - Manual (Page 37)

CHAPTER 5 - SETUP
5-3
• Parameter 7 = Set Point One Lbs Value
-2147483648 to 2147483647
10000.000
Length in Bytes = 4
• Parameter 8 = Set Point One Deadband
in Lbs
0 to 2147483647 0.100
Length in Bytes = 4
• Parameter 9 = Set Point One Preact in
Lbs
0.00 to 2147483.647
Length in Bytes = 4
• Parameter 10 = Set Point Two Type
bit 7 = On/Off
bit 1 = Low/High
bit 0 = Net/Gross
Length in Bytes = 1
• Parameter 11 = Set Point Two Lbs Value
-2147483648 to 2147483647
100000.000
Length in Bytes = 4
• Parameter 12 = Set Point Two Deadband
in Lbs
0 to 2147483.647 0.100
Length in Bytes = 4
• Parameter 13 = Set Point Two Preact in
Lbs
0 to 2147483647
Length in Bytes = 4