Hardy HI 200DNWM DeviceNet Weigh Module - Manual (Page 8)

HI 200DNWM MANUAL
1-2
• Chapter Two - Provides a complete
list of Specifications.
• Chapter Three - Contains informa-
tion needed to Install the HI
200DNWM weight module.
• Chapter Four - Provides complete
hardware Configuration instruc-
tions for setting dip switches and
jumpers.
• Chapter Five - Pertains to the firm-
ware Setup and preparation proce-
dures to calibrate and operate the
module.
• Chapter Six - Provides Calibration
instructions.
• Chapter Seven - Pertains to the
Operation of the HI 200DNWM
weight module.
• Chapter Eight - Pertains to the
Troubleshooting procedures to
repair the module.
Description The Hardy Instruments HI 200DNWM is
a small weigh module that communicates
Net and Gross weights to other devices
connected to a DeviceNet™ Network.
The weigh module supports Hardy’s
C2
®
calibration and has four levels of
WAVERSAVER
®
. The weigh module
consists of a printed circuit card with
standoffs (for mounting in an enclosure)
or rails for DIN rail mounting. The weigh
module outputs (produces) Gross, Net
and Tare weights and inputs (consumes)
Zero and Tare commands via
DeviceNet™. Configuration includes: