Hardy HI 200DNWM DeviceNet Weigh Module - Manual (Page 23)

CHAPTER 3 - INSTALLATION
3-7
FIG. 3-6 INSTALLATION OF THE RAIL PIECES
Step 5. Gently slide the HI 200DNWM
into the assembled DIN Rail until
the board is flush against the other
end piece. (See Fig. 3-7)
Step 6. Take the other assembled end piece
and snap it into the rail pieces. (See
Fig. 3-7)
Step 7. The HI 200DNWM is completely
in the Din Rail assembly ready for
installation. (See Fig. 3-8)