Hardy HI 200DNWM DeviceNet Weigh Module - Manual (Page 19)

CHAPTER 3 - INSTALLATION
3-3
Hardy Instruments Inc.
3860 Calle Fortunada
San Diego, CA 92123-1825
Phone: (858) 278-4900
FAX: (858) 278-6700
Web Site: http//www.hardyinst.com
E-Mail:
[email protected]
10. Record the model number and serial
number of the Weigh Module. Store this
information in a convenient, secure loca-
tion for reference when contacting Hardy
Instruments Customer Support Depart-
ment or to buy parts or firmware
upgrades.
Mechanical
Installation
Installing the
Bare Weigh
Module in an
Enclosure Step 1. Make sure that the Weigh Module
has at least 2 inches clearance
around the entire weigh module.
(See Fig. 3-1)
Step 2. Drill four thru holes or threaded
holes for four 6-32 pan head
machine screws. (See Fig. 3-2)
Step 3. Mount the four standoffs into the
back panel. (See Fig. 3-3)
Step 4. Fasten the weigh module to the
standoffs by installing the four (4)
pan head screws. (See Fig. 3-3)