ALTANA Haze-Gard Dual - Manual (Page 19)

18
English
SET UP MENU
Calibrate
Print Statistic
Print Online: on
Cont. Mode: off
Language: USA
Method: ISO
Escape: SET UP
ISO
Attention!
Keep
comp-port
open
Continue: OPERATE
Open the SET-UP Menu using the
cursor buttons.
The first part of the SET-UP Menu is
shown on the display.
To select the measurement method,
scroll down to the item “Method“
using the cursor buttons and press
the “operate” button.
The displayed method will change
and a message will appear
concerning the “comp-port”:
• Changing to ASTM:
cover the comp-port.
• Changing to ISO:
uncover from the comp-port.
Once a measurement mode has
been selected, the corresponding
calibration routine is started
immediately.
5 Selecting the Measurement Method