ALTANA Haze-Gard Dual - Manual (Page 47)

46
English
12.2 Changing a Fuse
Caution: First switch off the de-
vice and disconnect it from the
mains electricity supply by un-
plugging it.
Caution: For continued protec-
tion against risk of fire replace
only with same type and rating of
fuse.
Pull the fuse holder from the mains
plug socket (left side of device)
using a suitable tool (No. 2 screw
driver). Replace the defective fuse
with a new one. Use only the re-
commended fuse type (Technical
Specifications, Chapter 14). Repla-
ce the fuse device so that the arrow
beside the voltage used points to
the mark on the device case.
Only use the specified fuse type.
Never resort to short circuiting!
The marking on the voltage used
must coincide with the marking
on the device chassis.
12 Care and Maintenance