ALTANA Haze-Gard Dual - Manual (Page 36)

35
English
SET UP MENU
Calibrate
Print Statistic
Print Online: on
Cont. Mode: off
Language: USA
Method: ASTM
Escape: SET UP
OPERATE
SET UP
German
English
French
Italian
Spanish
Japanese
Confirm:
Escape:
10.5 Continuous Mode
If the Continuous Mode function is
selected, the device constantly
repeats the measurement proce-
dure. This function can be used to
check larger specimens for
homogeneity (see Chapter 9).
10.6 Language
To change the language, select the
menu item “Language” and press
the “operate” button.
The selection menu for the avail-
able languages is displayed. The
currently selected language is
marked. Select the desired
language using the cursor buttons
and press the “operate” button to
confirm your selection.
10.7 Method
It is possible to select between the
ASTM and ISO measurement
methods. The currently active
measurement method is indicated
under the “Method” menu item. To
change the measurement method,
select “Method” and press the
“operate” button. The displayed
measurement method is changed
and the device immediately
switches to the calibration function
for the selected measurement
method. You must now carry out the
calibration. (Chapter 6, p 19).
10 SET-UP