Stitch width control, How to adjust the stitch width), Stitch length control – Kenmore 385.162213 User Manual
Page 46: How to adjust the stitch length), Stitch length zones stitch width control, How to adjust buttonhole stitch density
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
stitch Width Control
(how to adjust the stitch width)
Slide the stitch width control to the desired stitch width
number
The higher the number, the greater the stitch width, The
mark shows the adjustment range when using the twin
needle. The blue zone is the appropriate adjustment range
for buttonhole sewing.
* Before sliding the stitch width control, be sure to raise the
needle above the fabric.,
(T) Stitch width control
Stitch Length Control
{how to adjust the stitch length)
Slide the stitch length control to the desired stitch length
number.
Set the stitch length control at S„S. when using a stretch
stitch. The higher the number, the greater the stitch length,.
The
EZZi
mark shows the adjustment range when sewing the
buttonhole.
* Raise the presser foot before sliding the stitch length
control,
® Stitch length control
34