Blind hem stitch – Kenmore 385.162213 User Manual
Page 68
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION V. UTILITY AND DECORATIVE Z'
STITCHES
Blind Hem Stitch
0 Stitch selector:
8
(2) Stitch width:
2 to 3
d) Stitch length;
Red zone
0 Needle thread tension:
2 to 6
(5) Presser foot G;
Blind hem foot
CZl
0
-
1
—
2
—
—gassa
ED @
Use the same color thread as the fabric.
On heavy weight fabrics that ravel, the raw edge should be
overcast first..
Fold the hem, as Illustrated.
0 Wrong side (Bottom side) of fabric
@ 1/r-7/16" (0.4-0.7cm)
(3) Light weight fabric
0 Heavy weight fabric
® To sew
0 When the needle comes to the left
0 When the needle comes to the right
0 Guide
d) Folded edge
There is a sliding guide screw on the blind hem foot that
allows you to precisely control where the needle pierces
the edge of the fabric fold. Adjust the screw so that at the
leftmost position of the stitch, the needle just pierces the
edge of the fold, If the needle pierces too far left, the
stitches will show on the right side of the fabric. Lower the
presser foot. Sew, guiding the folded edge along the guide
in the foot®. As you sew, the right side of the stitch forms
a chain stitch to the right of the fabric fold
56