Kenmore 385.162213 - Manual (Page 94)

Manual Buttonhole (Option)
(T) Stitch selector:
@ Stitch width:
(3) Stitch length:
@ Needle thread tension:
(5) Presser foot B:
1 (BH)
3 to 6. 5
0-25 to 1.0
2 to 6
Buttonhole foot
0
C MD
M
0
* To sew
If the diameter of the button is more than 1.0" (2 5 cm), a
buttonhole must be made manually as follows:
[T]Tum the handwheel toward you to raise the needle to
its highest position. Raise the presser foot.
iU Set the stitch at"
D"
by turning the stitch selector,
[U Attach the buttonhole foot [B],
13 Pull the buttonhole lever downward as far as it will go.
[Ulower the needle into the garment where the buttonhole
is to start, and lower the foot.
BH1[3]
SB
J
[3 Sew the front bartack and left row, then stop.
[T] Click the buttonhole lever toward you ,
BE
] Sew the back bartack and right row, then stop the
machine at the starting point.
To cut the opening and to reset for sewing the next
buttonhole, refer to instructions [3 and [|] on
page 80.
82