Event selection – Comtrol ES7510-XT User Manual
Page 119
RocketLinx ES7510-XT User Guide: 2000571
Rev. D
Event Selection - 119
Configuration Using the Web Interface
Event Selection
Event Types can be divided into three basic groups: System Events, PoE Events, and Port Events. System
Events are related to the overall function of the switch, whereas Port Events are related to the activity of
specific ports.
System Event
Warning is sent when….
Device Cold Start
Power is cut off and then reconnected.
Device Warm Start
Reboot the device by CLI or web user interface.
Authentication failure
An incorrect password or SNMP Community String is entered.
Time Synchronize
Failure
Accessing the NTP Server is failing.
Power 1 Failure
PW1 power failure.
Power 2 Failure
PW2 power failure.
Fault Relay
Fault Relay has occurred.
Ring Event
A ring event has occurred.
Loop Protection
A loop protection event has occurred.
SFP
The information read from the DDM SFP transceiver is over temperature or
out the range of TX/RX power.