Uploading the latest firmware or bootloader, To the es7510-xt – Comtrol ES7510-XT User Manual
Page 25
RocketLinx ES7510-XT User Guide: 2000571
Rev. D
Uploading the Latest Firmware or Bootloader - 25
Using PortVision DX
Uploading the Latest Firmware or Bootloader
You can use the following procedure to upload the latest firmware or bootloader.
1.
If you have not done so, download the latest firmware and bootloader using the previous subsection.
2.
Right-click the ES7510-XT in the Device List pane that you want to update, click Advanced --> Upload
firmware.
3.
Navigate to the location of the firmware files, select the appropriate file, and then click Open.
4.
Click Yes to the Upload Firmware message.
5.
Click Ok to the message notifying you that you should
wait to use the ES7510-XT when the status returns to
ON-LINE.
6.
Right-click the ES7510-XT in the Device List pane and click Refresh. Optionally, you can click the Refresh
button in the Toolbar and that refreshes all devices in PortVision DX.
7.
Verify that the version change is reflected in under the Software Version.