Device front panel – Comtrol ES7510-XT User Manual
Page 129
RocketLinx ES7510-XT User Guide: 2000571
Rev. D
Device Front Panel - 129
Configuration Using the Web Interface
Device Front Panel
The Device Front Panel allows you to see the LED status of the ES7510-XT.
Note: There is not a CLI command for this feature. If you can view the physical LEDs, you can use the
on Page 14, which provide detailed LED information.
LED
Name
LED Lit
LED Blinking
LED Off
Power 1/2
System power is ready
Power not available
Power off
Sys
System ready
System is uploading firmware
or the system is rebooting
System not ready
RS
Green: Working as ring master Red: Ring failed
ES7510-XT is in slave mode
DO
Red: DO activated
Not available
DO not activated
DI
Green: DI activated
Not available
DI not activated
LINK/ACT Port link is up
Port is transmitting
Port link is down
1000M
The port is linked at 1000Mbps Not available
Not available
PoE
Ports 1-8
Powering
Looking for a device
Power output over current, a
cable short, or PoE is disabled
for this port
Ports 9-10
Port link is up
Port is transmitting
Port link is down