Comtrol ES7510-XT - Manual (Page 160)

RocketLinx ES7510-XT User Guide: 2000571 Rev. D Network Redundancy (CLI) - 161
Configuration Using the Command Line Interface (CLI)
MSTP (Continued)
Display Current
MST
Configuration
Switch(config-mst)# show current
Current MST configuration
Name [comtrol]
Revision 65535
Instance Vlans Mapped
-------- --------------------------------------
0 1,4-4094
1 2
2 3
------------------------------------------------
Config HMAC-MD5 Digest:
0xB41829F9030A054FB74EF7A8587FF58D
------------------------------------------------
Remove Region
Name
Switch(config-mst)# no
name name configure
revision revision configure
instance the mst instance
Switch(config-mst)# no name
Remove
Instance
example Switch(config-mst)# no instance
<1-15> target instance number
Switch(config-mst)# no instance 2
Show Pending
MST
Configuration
Switch(config-mst)# show pending
Pending MST configuration
Name [] (->The name is removed by no name)
Revision 65535
Instance Vlans Mapped
-------- --------------------------------------
0 1,3-4094
1 2 (->Instance 2 is removed by no instance 2)
------------------------------------------------
Config HMAC-MD5 Digest:
0x3AB68794D602FDF43B21C0B37AC3BCA8
------------------------------------------------
Apply the
setting and go to
the
configuration
mode Switch(config-mst)# quit
apply all mst configuration changes
Switch(config)#
Apply the
setting and go to
the global mode Switch(config-mst)# end
apply all mst configuration changes
Switch#