Comtrol ES8510-XT - Manual (Page 112)

112 - Event Selection RocketLinx ES8510 and ES8510-XT User Guide: 2000513 Rev. H
Configuration Using the Web Interface
Event Selection
Event Types can be divided into two basic groups: System Events and Port Events. System Events are related
to the overall function of the switch, whereas Port Events are related to the activity of specific ports.
System Event Warning is sent when….
Device Cold Start Power is cut off and then reconnected.
Device Warm Start Reboot the device by CLI or web user interface.
Power 1 Failure Select this if you want the ES8510 to send notification of a PW1 failure.
Power 2 Failure Select this if you want the ES8510 to send notification of a PW2 failure.
Authentication failure An incorrect password or SNMP Community String is entered.
Time Synchronize Failure Accessing the NTP Server is failing.
Fault Relay Fault Relay has occurred.
DI1 Change The Digital Input#1 status has changed.
DI2 Change The Digital Input#2 status has changed.
Ring Event A ring event has occurred.
Loop Protection A loop protection event has occurred.