Comtrol ES8510-XT User Manual
Page 131
RocketLinx ES8510 and ES8510-XT User Guide: 2000513 Rev. H
Accessing the Options for a Command - 131
Configuration Using the Command Line Interface (CLI)
4.
Type show ip route and press the Enter key to view the IP routing tables for the ES8510.
5.
If you type list and press Enter, the ES8510 provides you information about all of the commands and
options for a mode. The following example shows the available commands and their options for User
EXEC mode.
Switch> show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
B - BGP, > - selected route, * - FIB route
S>* 0.0.0.0/0 [1/0] via 192.168.0.254, vlan1
C>* 127.0.0.0/8 is directly connected, lo
C>* 192.168.0.0/16 is directly connected, vlan1
ES8510> list
enable
exit
list
ping A.B.C.D
ping X:X::X:X
quit
show arp
show gvrp statistics [IFNAME]
show ip forwarding
show ip route
show ip route A.B.C.D
show ip route A.B.C.D/M
show ip route supernets-only
show version
telnet WORD
telnet WORD PORT
traceroute WORD