Comtrol ES8510-XT - Manual (Page 38)

38 - Feature Overview RocketLinx ES8510 and ES8510-XT User Guide: 2000513 Rev. H
Configuration Using the Web User Interface
CoS-Queuing
Mapping
CoS-Queue
Mapping
on Page
96
• CoS 0 through 7
• Queue 0 through 3
• Queue 3 highest priority
DHCP Server
Configuration
DHCP Server
Configuration
on
Page 52
DHCP Leased
Entries
on Page 54
DHCP Relay Agent
on Page 55
• DHCP Server Configuration
- Excluded Addresses and Manual Binding
- Port and IP Address
- Option 82
• DHCP Leased Entries
• DHCP Relay Agent
- Helper Address 1-4
- DHCP Option82 Relay Agent (Circuit ID/Remote ID)
DSCP-Queuing
Mapping
DSCP-Queue
Mapping
on Page
97
• DSCP 0 through 7
• Queue 0 through 3
• Queue 3 highest priority
Event Selection
Event Selection on
Page 112
• Device Cold Start
• Device Warm Start
• Authentication Failure
• Time Synchronization Failure
• Power 1 Failure
• Power 2 Failure
• Fault Relay
• DI1 Change
• DI2 Change
• Ring Event
• Loop Protection
• Ring Event
• SFP Failure
• Port by Port Event Selection
Fault Relay
Fault Relay on
Page 110
Relay 1- Multi-event
• DI - State (DI number and High or Low)
• Dry Output - On Period (Sec) and Off Period (Sec)
• Power Failure - Power 1 or Power 2
• Link Failure (Port or Ports)
• Ping Failure, IP Address, Reset Time (Sec), and Hold
Time (Sec)
• Super Ring Failure
Type Category Details