Upgrading firmware (local file), Upgrading firmware (tftp server), Cal file - see – Comtrol ES8510-XT User Manual
Page 62
62 - Upgrading Firmware (Local File)
RocketLinx ES8510 and ES8510-XT User Guide: 2000513 Rev. H
Configuration Using the Web Interface
Upgrading Firmware (Local File)
You can use this procedure to upgrade the web interface firmware (not Bootloader).
Note: You can also use PortVision DX to upload the web interface firmware. You must use PortVision DX or
the CLI to upload the Bootloader firmware.
1.
Windows operating systems after Windows XP: you must add Java to your Windows firewall exclusion
list. See
if you need to add Java exclusions for the Windows firewall.
2.
Open the web user interface for the ES8510, open the Firmware Upgrade page under Basic Settings.
3.
Select Local in the Firmware Upgrade drop list.
4.
Click the folder icon, browse to the firmware location,
highlight the .bin file, and click Open.
5.
Click the Upgrade button.
6.
Click Yes to the Confirm Dialog message.
7.
Click Ok to the Warning Message.
8.
Click Ok to close the Success Message.
Note: After the firmware has successfully uploaded, you should close and re-open the browser to clear the Java
Virtual Machine cache.
Upgrading Firmware (TFTP Server)
You can use this procedure to upgrade the firmware (not Bootloader) using a Windows operating systems.
Note: You can also use PortVision DX to upload firmware. You must use PortVision DX or the CLI to upload
Bootloader.
1.
Open a TFTP server, if necessary, see
2.
Place the ES8510 .bin file in the same directory where the TFTP server resides.
3.
If necessary, open the web user interface, open the Firmware Upgrade page in the Basic Settings group.