Comtrol ES8510-XT - Manual (Page 141)

RocketLinx ES8510 and ES8510-XT User Guide: 2000513 Rev. H Basic Settings (CLI) - 141
Configuration Using the Command Line Interface (CLI)
DHCP Server (cont.)
DHCP Commands
Switch(config)# router dhcp
Switch(config-dhcp)#
default-router DHCP Default Router
end Exit current mode and down to previous enable mode
exit Exit current mode and down to previous mode
ip IP protocol
lease DHCP Lease Time
list Print command list
network dhcp network
no Remove
quit Exit current mode and down to previous mode
service Enable service
DHCP Server Enable
Switch(config-dhcp)# service dhcp
<cr>
DHCP Server IP Pool
(Network/Mask)
Switch(config-dhcp)# network
A.B.C.D/M network/mask ex. 10.10.1.0/24
Switch(config-dhcp)# network 192.168.10.0/24
DHCP Server – Default
Gateway
Switch(config-dhcp)# default-router
A.B.C.D address
Switch(config-dhcp)# default-router 192.168.10.254
DHCP Server – lease time
Switch(config-dhcp)# lease
TIME second
Switch(config-dhcp)# lease 1000 (1000 second)
DHCP Server – Excluded
Address
Switch(config-dhcp)# ip dhcp excluded-address
A.B.C.D IP address
Switch(config-dhcp)# ip dhcp excluded-address 192.168.10.123
<cr>
DHCP Server – Static IP
and MAC binding
Switch(config-dhcp)# ip dhcp static
MACADDR MAC address
Switch(config-dhcp)# ip dhcp static 00C0.4E2C.0001
A.B.C.D leased IP address
Switch(config-dhcp)# ip dhcp static 00C0.4E2C.0001
192.168.10.99
DHCP Relay – Enable
DHCP Relay
Switch(config-dhcp)# ip dhcp relay information
option Option82
policy Option82
Switch(config-dhcp)# ip dhcp relay information option