Uploading the latest firmware or bootloader – Comtrol ES8510-XT User Manual
Page 23
RocketLinx ES8510 and ES8510-XT User Guide: 2000513 Rev. H
Uploading the Latest Firmware or Bootloader - 23
Using PortVision DX
Uploading the Latest Firmware or Bootloader
You can use the following procedure to upload the latest firmware or bootloader.
1.
If you have not done so, download the latest firmware and bootloader using the previous subsection.
2.
Right-click the ES8510 in the Device List pane that you want to update, click Advanced --> Upload
firmware.
3.
Navigate to the location of the firmware files, select the appropriate file, and then click Open.
4.
Click Yes to the Upload Firmware message.
5.
Click Ok to the message notifying you that you should
wait to use the ES8510 when the status returns to
ON-LINE.
6.
Right-click the ES8510 in the Device List pane and click Refresh. Optionally, you can click the Refresh
button in the Toolbar and that refreshes all devices in PortVision DX.
7.
Verify that the version change is reflected in under the Software Version.