Comtrol ES8510-XT - Manual (Page 42)

42 - Feature Overview RocketLinx ES8510 and ES8510-XT User Guide: 2000513 Rev. H
Configuration Using the Web User Interface
QoS Setting
QoS Setting on
Page 95
Queue scheduling
• Use 8.4.2.1 Weighted Fair Queuing Scheme
• Use A Strict Priority Scheme
Port Setting
• CoS - 0 through 7
• Trust Mode - COS Only, DSCP Only, COS First, or DSCP
First
Rate Control
Rate Control on
Page 68
• Ingress Packet Types - Broadcast Only, Broadcast/
Multicast, Broadcast/Multicast/Unknown Unicast, and
All
• Ingress Rate (1 Mbps to 100Mbps)
• Egress Packet Type
• Egress Rate (1 Mbps to 100Mbps)
Redundant Ring
Redundant Ring
on Page 82
• Ring ID and Name
• Ring Configuration
- ID
- Name
- Version (Super Ring and Rapid Super Ring)
- Device Priority
- Ring Port
- Path Cost
- Ring Port2
- Path Cost
- Rapid Dual Homing
- Ring Status
Redundant Ring
Information
Redundant Ring
Information
on
Page 83
• 32 Ring ID Maximum (0-31)
• Supports up to four 100M rings and one Gigabit ring per
switch
• Version
• Role
• Status
• RM MAC
• Blocking Port
• Role Transition Count
• Ring State Transition Count
Reset/Reboot
Load Default on
Page 63
System Reboot on
Page 64
• System Reset Button
• Reset to Factory Default Values
• Reboot from Interface
SNMP Configuration
SNMP
Configuration
on
Page 101
• V1/V2c Community
• Public - Read Only or Read and Write
• Private - Read Only or Read and Write
Type Category Details